Buchner Funnels type 1 |
Size : |
35.0mm |
50.0mm |
60.0mm |
75.0mm |
85.0mm |
100.0mm |
125.0mm |
150.0mm |
200.0mm |
250.0mm |
300.0mm |
|
Buchner Funnel (type 2) |
Buchner funnel is Porcelain, integral perforated plate, straight sides, glazed inside and outside. |
Porecelain Crucibles |
Capacity : |
5ml (without Lid) |
10ml (with Lid) |
15ml (with Lid) |
18ml (with Lid) |
25ml (with Lid) |
30ml (with Lid) |
50ml (with Lid) |
80ml (with Lid) |
100ml (with Lid) |
150ml (with Lid) |
200ml (with Lid) |
250ml (with Lid) |
|
Gooch Crucibles |
Capacity : |
20ml |
25ml |
30ml |
40ml |
50ml |
100ml |
200ml |
|
Spare Lids for Crucibles |
Size : |
For 5ml crucibles |
For 10ml crucibles |
For 15ml crucibles |
For 18ml crucibles |
For 25ml crucibles |
For 50ml crucibles |
|
Plates for Dessicators |
Size : |
For 100mm Dessicator |
For 125mm Dessicator |
For 150mm Dessicator |
For 200mm Dessicator |
For 250mm Dessicator |
For 300mm Dessicator |
|
Bell Jar |
Bell jar in Glass, with ground glass stopper at top and ground rim. |
Wash Bottle
|
Wash Bottle is made of polyethylene. Solutions can be easily dispensed by compressing the bottle, with screw cap and bent tube.
Capacity: 125ml, 250ml, 500ml, 1000ml |
Pneumatic Trough |
Pneumatic Trough is made of Glass and in circular shape. |
pH Indicator Paper Dispenser |
For determination of pH value.
Range 1-14. Paper tape 5mm wide and 5m long.
Colour chart is on the side of the dispenser. |
Thistle Funnel |
Thistle Funnel is made of Borosilicate glass. Low expansion characteristics, chemical stability and
hardness. Stem Length is 300mm. |
Spatula, Stainless Steel |
It is made of stainless steel. Spoon at one end and spatula at the other. Length is 100mm, 150mm, 200mm |
Spatula, With Handle |
Stainless steel blade with a wooden handle for firm grip.
Blade Length is 100mm, 150mm |
Spatula, Chattaway |
One end flat and other end bent up. Length is 200mm. |
Thistle Funnel, Safety |
With bend and two safety bulbs, length of stem is 300 mm. |
Dessicator, Vacuum |
Borosilicate glass, diameter is 160 mm. |
Tripod Stand, Triangular |
Flat triangular top. Side length 125mm. Height 200mm. |
Tripod Stand, Triangular |
Mild Steel triangular top and legs. Legs bent outwards for
stability.
| Top Side |
Height |
| 125mm |
150mm |
| 125mm |
200mm |
|
Tripod Stand, Circular |
Circular top. Legs bent outwards for stability.
| O.D. |
I.D. |
Height |
| 80mm |
125mm |
200mm |
| 110mm |
150mm |
200mm |
|
Jar, Coupling |
Jar coupling with cover, for 5 slides in vertical position. |
Teats For Pipettes |
It is a made of rubber, with rolled edges, for use with dropping pipettes, pack of 100 |
Jar, Staining, Rectangular |
With cover, for 10 slides in horizontal position. |
Gas Jar |
Gas jar in Glass, with foot and ground flange. |
Platinum Electrodes |
Platinum wire or foil fused into glass rod with internal lead, per pair, Top of Form Bottom of Form with rubber stopper and glass protection tube. |
Carbon Electrodes |
Carbon electrodes in rubber stoppers, per pair, fitted with terminals. |
CLIPS MOHR
|
Nickel plated iron, thick quality, round edges.
(a) Length 50mm (b) Length 70 mm. |
CLIPS HOFMANN
|
Brass nickel plated, with screw and hinged bottom bar for fitting and removal without access to ends of tube.
Width between bars.
(a) Small 18mm, (b) Medium 20 mm, (c) Large 25 mm. |
CORKS, RUBBER |
Solid resistance to acid, alkali and ammonia, soft red colour.
|
CORK BORER SET |
Made of brass, chrome plated finish with individual handles, cutting edge at bottom, with rods for clearing borers.
(a) Set of 6, Dia range 5 to 12 mm.
(b) Set of 12, Dia range 5 to 20 mm. |
WATER TAP
|
Swan neck, gun metal, chrome plated on a flanged standard with tail screwed 12 mm and fitted with back nut and washer for bench surface. Located square on under side of flanged. Leak proof. One way. |
GAS TAP |
Gun metal oxidized or chrome plated finish pillar mounted flanged base screwed female and flanged, drilled for fixing screws, leak proof. One way. |
RETORT STAND
|
Cast iron rectangular base with stove hammertone painted with hole. 12.5 dia M.S. chrome plated one end half round and other end machine threaded with washer and hexagonal nut. |
|